The B1 Bluetooth Receiver utilizes the
AKM AK4396A DAC, widely known for
its low noise and high fidelity B1 is essentially an upsampling
24-bit Bluetooth DAC and will pad
all bit depths internally to 24-bits,
thus achieving a higher signal-to-noise ratio. Due to the AK4396A’s high signal-to-noise
specs, the fact that digital signal is converted
(upsampled) to 24-bits and the added benefit
of triple redundancy power source conversion
and filtering, the B1 presents impressive low
noise and low distortion characteristics with
a noticeable improvement over other
Bluetooth devices. Easy setup, connects in seconds
Plug-n-play, no software to install
Superior sound and extended range
Streams audio from any media player
(iTunes, Amarra, Youtube, etc.)
Connects to any music system with
an audio input
Type: Bluetooth receiver type
Bluetooth 4.0 audio:
Supported Bluetooth codecs aptX, AAC, SBC
Supported Bluetooth profiles:
A2DP, AVRCP
Inputs: Bluetooth
Outputs:
Stereo analog RCA, Digital optical (SPDIF)
Required power: 5V, 200mA
Operation range: up to 100ft (30m) typical Output impedance: 57 Ohms
D/A converter: AKM AK4396
SNR: SNR (DC to 20 kHz) >100dB
THD+N: (1 kHz FS 96 kS/s) <0.02%
Frequency response:
10Hz~20kHz (+/-0.5dB)
Crosstalk: >-86dB
Power filtering: 3-stage redundant regulation
Crosstalk: >-86dB Input bit depth: 24-bit (upsampled)
特點: 數碼光纖及RCA音頻輸出, 支援24Bit超採樣昇頻功能
(iTunes, Amarra, Youtube)
等串流傳輸高質音頻信號
支持藍芽編解碼器aptX, AAC, SBC
AKM AK4396A DAC, widely known for
its low noise and high fidelity
24-bit Bluetooth DAC and will pad
all bit depths internally to 24-bits,
thus achieving a higher signal-to-noise ratio.
specs, the fact that digital signal is converted
(upsampled) to 24-bits and the added benefit
of triple redundancy power source conversion
and filtering, the B1 presents impressive low
noise and low distortion characteristics with
a noticeable improvement over other
Bluetooth devices.
(iTunes, Amarra, Youtube, etc.)
an audio input
Supported Bluetooth codecs aptX, AAC, SBC
A2DP, AVRCP
Stereo analog RCA, Digital optical (SPDIF)
10Hz~20kHz (+/-0.5dB)