瀏覽人數:
帳號 :
密碼 :
登記會員| 忘記密碼
> 發燒線材 > QED 高級發燒訊號線 > 英國QEDRCA (0.6m) RCA AudioCable 發燒音頻線

英國QED RCA (0.6m)
RCA Audio Cable 發燒音頻線


(金屬 PVC 絕緣吸收高頻噪訊)
(極低的失真傳輸導體互補技術)
(40週年版全新導體 Analoc頭)

(5N鍍銀銅體, 可杜絕電磁干擾)
(插頭RCA to RCA Analoc插頭)

分期付款 :
每月HKD $*** (共12個月)

LASTUPDATE: 31-10-2026

HKD $1,290
   {最新上架}
   {少量現貨}

HKD $1,225
產品備註 :



特點: 線身特殊金屬材質PVC絕緣, 可吸收非常高頻率噪訊

 原廠一年保用
 QED QE2450 REFERENCE Audio 40 RCA音頻線
   (40週年版全新導體Analoc插頭)
 Reference Audio 40線身最外層採用內含
   10%特殊金屬材質的PVC絕緣, 可吸收非常
   高頻率的噪訊
 接頭部分, QED認為傳統常被用來當作接頭
   材質的黃銅雖然廉價, 容易加工, 但本身卻存在一些問題,
   而純銅雖為很好的材料卻又非常昂貴, 但QED發現到,
   若只使用一小部分的純銅導體做接觸面積的話,
   則可節省成本之外, 亦可解決黃銅作為導體的一些缺失,
   於是以此為出發點, 發展出一種名為Analoc技術,
   不採用大體積的銅質鎖頭結構, 以小型高純度銅為接頭材質,
   搭配低集膚效應而成
 而導體部分, 採純度99.999%的5N等級SP-OFC無氧銅材質,
   表面再經鍍銀處理, 並以不對稱的雙絞線排列方式構成,
   搭配最新研發出的互補導體技術
   (Complementary Conductor Technology), 利用兩個不同
   線徑的導體, 執行相同的音訊信號
 導體屏蔽也使用OFC無氧銅為材質, QED認為這樣的設計,
   能夠使Reference Audio 40達到100%的電磁屏蔽,
   可杜絕電磁干擾, 使音訊路徑保持乾淨, 而絕緣則使用了
   擁有較低介電常數的發泡聚乙烯材質為材料,
   提供較佳的傳輸速度
 QED REFERENCE Audio 40 (Pair)
 All-new Analoc2™ design
 The Analoc2™ design still features low bulk,
   high purity copper connectors alongside low mass metal
   barrels, but now cleverly substitutes high rigidity
   thermoplastic material for both the inner support structure
   and the cable strain relief to eliminate the detrimental effects
   of eddy currents
 Although already smaller than in traditional bulk brass plugs,
   these unfavourable currents were still able to circulate weakly
   in the isolated metal body of the previous plug design.
 Now with the new material in place, these remnant resonant
   distortions are completely prevented from adversely
   affecting the information contained in the audio signal
   as it travels through the new plug.
 To complete the RCA plug’s Analoc2™ upgrade and
   to help combat the skin effect, the hollow, gold (or rhodium)
   plated, high-purity copper signal-pins are retained,
   while the effectiveness of the slip ring which locks in place
   the similarly plated, pure copper ground-terminal as the
   barrels are tightened, has also been improved.
 Ferrite cord insulation
   A Zn/Mn Ferrite jacket is used within the cordage to
   absorb very high frequency noise components outside
   of the audible band that have an adverse effect on the
   micro-timing of the audio signal. When measured
   at very high frequencies, Reference Audio 40 cables
   exhibit cleaner signal transmission than standard audio
   interconnects
 Further protection for the Silver Plated 99.999% Oxygen
   Free Copper (SPOFC) conductors comes in the form of
   a low loss, low density, dielectric foam Polyethylene (LDPE)
   inner jacket that minimises
 electrical energy loss in the cable insulation which can
   have a detrimental effect on the fidelity of the sound
   compared with cheaper PVC alternatives
 Analoc2™ plug with inner high rigidity
   thermoplastic material
 Silver Plated 99.999% Oxygen Free Copper
   (SPOFC) conductors with LDPE dielectric
 Asymmetrical twisted pair geometry
 OFC shield giving 100% electromagnetic screening
 Zn/Mn ferrite Jacket
 Gold plated updated QED Analoc2 RCA plugs
 Parallel Capacitance: 76 pF/m
 Inductance: 0.37 μH/m
 極低的失真傳輸
 導體互補技術
 5N鍍銀銅體
 ANALOC插頭
 插頭RCA to RCA Analoc插頭
 長度: 0.6m米
 另有: 1.0m米  / 1.5m 可供選擇